background image

Cannot set an “Auto Cook”
programme or 
cannot get the timer to turn
the oven on or off at the
required times.

Read the Timer instructions in this book carefully
remembering that the Cook period is the length of time
that the timer will switch the oven(s) on as part of an Auto
Cooking Programme.

Oven lamp does not work

The oven lamp is not covered by the guarantee. 
The part is easily changed (see the section on oven lamp
replacement). A new lamp may be obtained from our
Spare Parts department, see Key Contacts (back page).

22

SOMETHING WRONG

WITH YOUR COOKER

PROBLEM

CHECK

Main oven does not work, but
the grill, top oven and hotplate
burners work.

The timer may be set for an Auto Cooking Programme.
Check the timer to see if “AUTO” is illuminated. If it is,
follow the instructions given in the timer section of this
book to cancel the Auto Cooking Programme.

Slight odour or small
amount of smoke when
grill / oven used first 
time                    

This is normal and should cease after a short period.

Oven cooks too fast or too
slow

Check that the oven temperature and shelf positions are
as recommended in the Oven Cooking Charts. 
However, it may be necessary to increase or decrease the
recommended setting slightly to suit your taste.

The electricity supply to the cooker may have been been
interrupted, but has now come back on again. set the
correct time of day by following the instructions given in
the timer section of this book.

Timer Display shows "0:00"
with "Auto" Flashing.

To minimise the risk of injury to children please dispose of your product carefully and safely.
Remove all doors and lids.  Remove the mains cable (where fitted) by cutting off flush with the
appliance and always ensure that no plug is left in a condition where it could be connected to
the electricity supply.
To help the environment,  Local Authority instructions should be followed for the disposal of
your product. 

Disposal of your product

The European Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE),
requires that old household electrical appliances must not be disposed of in the normal
unsorted municipal waste stream. Old appliances must be collected separately in order to
optimise the recovery and recycling of the materials they contain and reduce the impact on
human health and the environment. 

The crossed out “wheeled bin” symbol on the product reminds you of your obligation,
that when you dispose of the appliance it must be separately collected.
Consumers should contact their local authority or retailer for information concerning the
correct disposal of their old appliance.

Disposal of old electrical appliances

Summary of Contents for HARROGATE C60DH

































Reviews: