1. SPECIFICATIONS
AUTOMATIC BATTERY CHARGER
Model: CT4341
Voltage Input: AC 230V/50Hz
Rated Input Power: 158W
Voltage Output: DC 6V/12V Selectable
Max. Current: 12A
Charging Current: 6V-8.4A Fast / 5.2A Slow
12V-8.4A Fast / 6A Slow
Battery Capacity: 6V - 40-160Ah Fast / 9-36Ah Slow
12V - 40-160Ah Fast / 15-60Ah Slow
Fuse: 15A
2. SAFETY INSTRUCTIONS
♦ The charger is designed for charging only of lead batteries with the power 6/12V.
Do not use the charger for any other purpose. Always follow battery
manufacturers recommendations.
♦ Check the charger cables prior to use. Ensure that no cracks or bends have
occurred in the cables. The operation of the battery charger with the damage
cables is forbidden. A charger with a damaged cord must be returned to the
retailer.
♦ Never try to charge non rechargeable batteries.
♦ Never charge a damaged battery.
♦ Never charge a frozen battery.
♦ Never place the charger on the top of the battery when charging.
♦ Always provide for proper ventilation during charging.
♦ Avoid covering the charger.
♦ A battery being charged could emit explosive gases. Prevent sparks close to
the battery. When batteries reach the end of their life cycle internal, sparks may
occur.
♦ All batteries fail sooner or later. A battery that fails during charging is normally
taken care of by the chargers advanced control, but some rare errors in the
battery could still exist.
Don't leave any battery during charging unattended for a longer period of time.
♦ Ensure that the cabling is not jammed or comes into contact with hot surfaces or
sharp edges.
♦ Battery acid is corrosive. Rinse immediately with water if acid comes into
contact with skin or eyes, seek immediate medical advice.
♦ Always check that the charger has switched to charging end, before leaving the
charger unattended and connected for long periods. If the charger has not
