4
Mounting the Wall Safe
The Wall Safe can be mounted into a standard residential wall with a depth of at least 7.88
inches and a wall area of at least 22.84 inches (horizontal position) X 26.78 inches (vertical
position).
Make a hole in the wall that is approximately 14.37 inches X 14.37 inches.
Carefully place the safe into the
wall. Don’t forcefully insert, the unit should slide into the
opening easily.
Note:
There should be a .25 inch gap between the safe and wall.
Open the door and locate the 4 mounting tabs (2 on each side of walls). Mark holes for
pre-drilling.
Remove the safe and pre-drill holes at the marked locations.
Reinsert safe into the wall and secure it with four (4) wood screws
(A) and four (4) 3/8”
flat washer (L).
