G. CONTROLLER INSTRUCTIONS
PRIMARY FUNCTIONS
————————————————————————————————————————————————————————————————
Applicable Models:
CAN-210 and CAN-380
Power Supply:
208-240V/50hz/60hz~Single Phase
Working Requirement:
Temperature 5-60°C/41°-140°F,
Humidity RH40%-RH≤95%
I N S T R U C T I O N M A N U A L 1 . 0
|
D E H U M I D I F I E R
|
C A N - 2 1 0 / C A N - 3 8 0
9
1. TO TURN ON: press
*Note that the selected icon will blink in each function to set the configuration.
2. TO SET THE HUMIDITY SETPOINT: press
Use the and arrows to select the desired humidity %.
3. TIMER CONFIGURATIONS: There are three settings —
Timer on, timer off, and time clock (24 hour clock).
i. TO CONFIGURE THE HOURS: press to select timer ‘on’- schedule in
hours desired.
ii. TO CONFIGURE THE MINUTES: press again after configuring the
hours to schedule the minutes.
iii. TO PREVENT INTERMITTENT SHUT-OFF: set the timer both ON and OFF
at 0:00. Clock set to appropriate time.
*The selected icon will blink in each function to set the configuration.
*Clock configuration and repeat.
Fig. 1.13