-With the camera can connect maximum 3 users
-Can be attached to desk/ wall
1.Before setting up the product check:
•
If you have access to the Wi-Fi network (2.4 GHz WiFi).
•
If you are close near to the Wi-Fi router, to gain a better Wi-Fi signal.
•
If you use Wi-Fi repeater, make sure that your router and the Wi-Fi repeater have the same SSID and that you
use the same password for the router and repeater.
•
You have the password at your hand. Always connect the baby camera to a secure network.
•
Make sure that your smart device runs on iOS and Android.
2. Download the YCC365 Plus app from App Store or Google Play.
3.Or Scan the QR code:
BEFORE SET-UP AND USE OF THE PRODUCT
CONNECTING TO THE CAMERA
1. Creating an account – See the figures on page 1:
When you use this app for the first time, you need to use your e-mail address to register an account.
Note: the current version supports registration via your mobile phone number only for Vietnam. Use an e-
mail address in order to sign up if you are from other part of the world.
A. If you forget your password, you can reset it. Just click on Forgot password on the login page.
Б. Password should be at least 6 characters and not longer than 30 characters. It should be a combination of
letters and numbers
В. After you register, the app will send you a confirmation e-mail to your e-mail address. Open your e-mail
account and follow the link from the e-mail of the app in order to confirm your registration.
Г. Return to the app to continue the process of connecting the camera to your mobile device.
2. Adding the camera/ device:
Note: The camera supports only 2.4G Wi-Fi. Before adding the device make sure that your router is with 2.4G
Wi-Fi and your mobile device in connected to the 2.4G Wi-Fi network of your home.
А. Scanning the QR code to add the camera – See the figures on page 1:
•
Connect your phone to the Wi-Fi network of your home. Open the YCC365 Plus app and log into your account.
•
Click on: Add device for smart life → Intelligent camera → Device adding by scanning the code.
•
The camera will make sound and you will hear the following: Please, configure camera by scanning code or AP
hotspot.
•
Click on Next. A new window will open Connect to Wi-Fi. The name of your Wi-Fi network will be visible.
Insert the password of your network.
•
Click on Next. A new window with QR code will pop out. Point the screen of your mobile device towards lens
of the camera in order to scan the code.
•
When you hear a sound or see indicating light, click on Beep or flashing light.
•
A new window will be opened – Device is under connecting, and the percentages will be counted until the
complete connection of the camera with your mobile device and Wi-Fi network.
•
If the connection is successful, a new window will pop out Addition success! Click on any of the buttons to
choose the device name: Shop/ Bedroom/ Living room/ Entrance/ Office/ Meeting room.
•
After choosing the name press on Start to experience. A new window will open with the video stream directly
from the camera. You may need to refresh the page several times until the video is loaded.
3. Connecting via AP Hotspot – See the figures on page 2:
•
Open the app.
•
Press the plus icon to add the device.
•
Press intelligent camera. Choose Addition of AP hotspot. A window will open with Add the device, press Next
on the bottom of the screen.
•
After that will open a window with Network configuration. Click on Go to Setting.
16
Summary of Contents for IP-011H
Page 1: ...BG 3MP WIFI VISION IP 011H GB USER MANUAL OF 3MP WIFI BABY CAMERA MODEL VISION ITEM NO IP 011H...
Page 2: ...1 SIGN UP AN ACCOUNT QR SCAN A QR CODE TO ADD THE DEVICE BUTTONS FOR CONTROLING THE CAMERA...
Page 3: ...AP CONNECTING VIA AP HOTSPOT 2 CONNECTING VIA DIRECT HOTSPOT...
Page 4: ...3 CONNECTING VIA DIRECT HOTSPOT PRESET SPLIT SCREEN TO WATCH...
