CANGAROO IP-011H User Manual Download

Page: 15 / 21

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
THE USER MANUAL CONTAINS IMPORTANT INFORMATION ON THE CORRECT USE AND MAINTENANCE OF THE
PRODUCT. THE WIFI BABY CAMERA IP-011H COMPLIES WITH THE REQUIREMENTS OF EUROPEAN STANDARDS
EN 60950-1:2006-A2:2013; ЕN 62311:2008; EN 301 489-1 V2.1.1; EN 301 489-17 V3.1.1; EN 300 328 V2.1.1.
WARNING! THE SCHEMES AND FIGURES IN THIS INSTRUCTION ARE FOR ILLUSTRATIVE PURPOSES ONLY AND
THE PRODUCT YOU HAVE BOUGHT MAY DIFFER FROM THEM.

1.WARNING! This product is intended as an aid. Do not use it as a medical monitor or a substitute for
responsible and proper adult supervision.
2.Never leave your baby alone at your home. Always make sure there is someone present to look after the
baby and take care of its needs.
3.This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
4.The product is not a toy. Do not let Your children to play with it!
5.Use this product only as intended and described in this manual. Do not place any accessories, which aren’t
approved by the manufacturer and do not make any improvements or changes on the product, as this may
lead to its improper work or damage.
6.WARNING! The camera supply cord must be plugged into a wall outlet farthest from your baby. Place the
camera as far away as possible from your baby. Cables are potential choking hazard. They should be placed out
of the reach of children (at least 1 meter away).
7.Do not put or install the device in or above the baby crib/ play yard.
8.The camera should be at least 1 meter away from your child in order to ensure that the microphone can pick
up the child's sound.
9.If you attach the baby camera on a table or on a low cabinet, do not let the power cord to hang over the
edge of the table or worktop. People can stumble into the cables.
10.The antenna of the camera is fixed. Do not try to pull it.
11.Do not try to modify the product, to repair it by yourself when damaged or to replace any of the parts with
such that are not provided from the manufacturer/ importer.
12.Do not immerse any of the baby camera, the power cord or any of the product’s parts into water or other
liquid.
13.Do not reach after appliance that has fallen into water. If such accident occurs, you should unplug the
supply cord, if it has been connected to the mains power outlet.
14.Do not place the device where water or any other liquid can drip or splash onto it.
15.Never use the baby monitor in moist places or close to water.
16.Do not use the product in highly polluted area. This could shorten the life of the device.
17.Do not put any objects on top of the baby monitor and do not cover it.
18.Do not block any ventilation openings. Install according to the manufacturer’s instructions.
19.Before plugging the power cord into a mains outlet, make sure that the voltage indicated on the adapter
corresponds to the local power supply.
20.The supply cord should be attached to mains power outlet with the following specifications: AC100 – 240V/
50-60Hz.
21.Take care not to spill food, water or any other liquid on the power cord.
22.Do not cut/ modify the adapter’s parts as this causes a hazardous situation.
23.Use only the power cord, supplied by the manufacturer/ importer.
24.Do not use the adapter if any cord or plug is damaged.
25.To avoid injury replace the damaged adapter with original new one.
26.Do not open the housing of the baby monitor to prevent an electric shock.
27.Do not use the device if it is not working normally, if it is damaged or has been dropped in water. Contact
the shop from which you bought the product or the importer, in order to remove the damage.