CANGAROO BB007, Instruction Manual

Page: 12 / 40

12
Find the battery cover . Use a screwdriver to loosen the cap screws. Take it off. Insert 4 1.5 V type AAA (LR03)
alkaline batteries (not included), observing the polarity marked on the bottom of the compartment. Put the battery
cover back on and tighten the screws with a screwdriver. Do not overtighten.
To remove the batteries, repeat the steps.
Note: Restart the electronics if the mechanism becomes unstable. Turn off the power button, remove the
batteries, and then insert them following the steps above.
IMPORTANT! The batteries are exhausted if the movement and volume of the music weaken. Replace them
with new ones and dispose of used batteries in the designated area.
WARNING!

Only an adult should handle the batteries.

Always use new batteries.

If you are not going to use the product for a long time, remove the batteries.

Remove used batteries from the product and dispose of them in the designated areas, not in household waste
containers.

Do not dispose of batteries in a fire as there is a risk of explosion or leakage.

Non-rechargeable batteries are not to be recharged.

Use only the type of battery recommended by the manufacturer.

Different types of batteries are not to be mixed.

New and used batteries are not to be mixed.

Batteries are to be inserted with the correct polarity.
Protect the environment by not disposing of this product in household waste
containers (2002/96 / EU). Check the recommendations of local authorities.
IMPORTANT! The diagrams and figures in this instruction are illustrative and indicative only.
Follow exactly the instructions and sequence for assembling and operating with the product.
Check the securing of the fixation after each operation.
Fixing a certain position in most cases is accompanied by a clicking sound.
Components - illustration A
After unpacking, make sure that all elements of illustration A are available.
Assembly of the structure – illustration C
Insert element 2 – the seat, into element 1 – the base.
WARNING! Make sure that the base is assembled correctly and is stable, this ensures the safety of your child!
Installing a canopy – illustration D
Fix element 3 - canopy, to element 2.
Placing toys – illustration E
Place the toys - item 4, on the canopy (3).
Installing the restraint system - illustration F
Unbutton the mechanism before placing the baby. Place the baby and fasten the belts (you will hear a "click" sound
when properly fixed in the buckle). Fasten the belts around the child's waist in a position that is comfortable for him.
Check the restraint system by pulling it slightly away from your child. The restraint system must remain attached.
Using an adapter - illustration G
Use item 6 for battery-free operation.
INSTRUCTIONS AND WARNINGS FOR WORKING WITH BATTERIES - illustration B
ASSEMBLY INSTRUCTIONS
OPERATING INSTRUCTIONS