EN 4
and cause the glass to shatter.
•
The oven must be switched off before removing the removable
parts. After cleaning, reassemble them according the instruc-
tions.
•
Only use the meat probe recommended for this oven.
•
Do not use a steam cleaner or high pressure spray for cleaning
operations.
• IF THE OVEN IS PROVIDED BY THE MANUFACTURER WITH
-
OUT PLUG:
THE APPLIANCE MUST NOT BE CONNECTED TO THE POW
-
ER SOURCE USING PLUG OR SOCKETS, BUT MUST BE DI
-
RECTLY CONNECTED TO THE SUPPLY MAINS. The con
-
nection to the power source must be carried out by a suitably
qualified professional. In order to have an installation compliant
to the current safety legislation the oven must be connect-
ed only placing an omnipolar breaker, with contact separation
compliant to the requirements for overvoltage category III,
between the appliance and the power source. The omnipolar
breaker must bear the maximum connected load and must be
in line with current legislation. The yellow-green earth cable
should not be interrupted by the breaker. The omnipolar break-
er used for the connection must be easily accessible when the
appliance is installed.
The connection to the power source must be carried out by a
suitably qualified professional considering the polarity of the
oven and of the power source.
The disconnection must be achieved incorporating a switch in
the fixed wiring in accordance with the wiring rules
• IF THE OVEN IS PROVI ED BY THE MANUFACTURER WITH
PLUG:
The socket must be suitable for the load indicated on the tag
and must have ground contact connected and in operation.
The earth conductor is yellow-green in colour. This operation
should be carried out by a suitably qualified professional. ln case
Summary of Contents for Idea FIDC N615/1
Page 32: ...70013818 ...
