Candy GSVW1488DHC1, Manual

Page: 44 / 124

44
7. DRYING CYCLE
l
Drying guidance advice is general, but
practical experience of using the product
will help you to achieve the best drying
results.
l
We recommend setting a lower drying
time than indicated, when first using the
appliance in order to establish the degree
of dryness required.
l
We recommend not drying fabrics that
fray easily, such as rugs or garments with
a deep pile, in order to avoid air duct
clogging.
l
We recommend that you sort the laundry
by the following methods:
- By drying care symbols, which are
displayed on the clothing labels
Suitable for tumble drying.
Tumble dry at high temperature.
Tumble dry at low temperature only.
DO NOT tumble dry.
- By size and thickness
Whenever the wash load is bigger than
the drying capacity, separate the clothes
according to thickness (e.g. towels from
thin underwear).
- By fabric type
Cottons/linen: towels, cotton jersey, bed
and table linen.
Synthetics: blouses, shirts, overalls, etc.
made of polyester or polyamide, as well
as for cotton/synthetic mixes.
l
Only dry pre-spun laundry.
l
The washer dryer can perform the
following types of drying:
- Low temperature drying programme
recommended for mixed fabrics
(synthetics/cotton) synthetic fabrics
( symbol on programme dial).
- High temperature drying programme
recommended for cotton, terry toweling,
linen, hemp fabrics, etc... (
symbol
on programme dial).
l
Open the door.
l
Fill with the laundry, not exceeding the
maximum drying load indicated in the
programme table. For large items (e.g.
sheets) or very absorbent items (e.g.
towels or jeans), it is a good idea to
reduce the load.
l
Close the door.
If the fabric does not have a care label,
you should assume that it is not
suitable for drying.
During the drying phase the drum will
accelerate to a higher speed to
distribute the load and to optimize the
drying performance.
The correct way to dry
The appliance door is fitted with a
protective shield to prevent contact
with the glass door which can reach
high temperatures, during the drying
cycle.
It should not be necessary to remove
the shield from the machine during
the normal course of use.