18
L
EN
“DIGITAL” DISPLAY
The display’s indicator
system allows you to be
constantly informed about
the status of the machine:
1) SPIN SPEED
Once the programme has
been selected, the
maximum spin speed
allowed for that programme
appears on the display.
Pressing the spin button will
reduce the speed by 100
rpm each time the button is
pressed. The minimum
speed allowed is 400 rpm, or
it is possible to omit the spin
by pressing the spin button
repeatedly.
2) DELAY START LIGHT
This flashes when delay start
has been set.
3) DOOR LOCKED
INDICATOR
The “Door Locked” indicator
light is illuminated when the
door is fully closed and the
machine is ON.
When START is pressed on
the machine with the door
closed the indicator will flash
momentarily and then
illuminate.
If the door is not closed the
indicator will continue to
flash.
A special safety device
prevents the door from
being opened immediately
after the end of the cycle.
Wait for 2 minutes after the
wash cycle has finished and
the Door Locked light has
gone out before opening
the door. At the end of cycle
turn the programme
selector to OFF .
1
2
3
4
RO
AFISAJ “DIGITAL”
Sistemul de afisare cu
indicatoare permite
informarea constanta asupra
starii masinii de spalat:
1) VITEZA DE CENTRIFUGARE
Dupa ce a fost selectat
programul, viteza maxima de
centrifugare permisa pentru
programul respectiv va
apare pe afisaj. Apasarea
butonului pentru selectarea
vitezei de centrifugare va
reduce viteza cu cate 100
rpm de fiecare data cand
este apasat. Viteza minima
permisa este de 400 rpm sau
se poate trece peste selectia
vitezei prin apasarea acestui
buton in mod repetat.
2) INDICATOR START INTARZIAT
Acest indicator clipeste
atunci cand a fost setata
functia de pornire intarziata.
3) INDICATOR HUBLOU
BLOCAT
Ledul este aprins când usa e
blocata si masina este în
functiune. Când apasati
butonul Pornit/Oprit si hubloul
este închis, ledul va clipi pe
moment si apoi va ramâne
aprins.
Atentie: Daca ledul va clipi in
continuare atunci usa nu e
inchisa.
Atentie: un dispozitiv special
de siguranta impiedica
deschiderea imediata a
hubloului la sfarsitul spalarii.
Dupa terminarea
centrifugarii asteptati doua
minute inainte de a deschide
hubloul.
La sfarsitul programului rotiti
butonul selector de programe
pe pozitia OFF.
Summary of Contents for Grand'O Evo
Page 1: ...Instructiuni de utilizare User instructions RO EN ...
Page 38: ......