EN 08
3. Use of the Oven
3.1 Display description
1. Minute minder
2. Clock setting
3. Cooking time
4. End of cooking
5. Temperature or clock display
6. LCD display adjustment controls
7. Thermostat selector knob
8. Function selector knob
8
WARNING!
The first operation to carry out after installation, or after a
power cut, is to set the time of day (a power cut has occured
if the display is flashing 12:00).
200°
-> The temperature LED “°” flashes until the displayed
temperature is reached.
HOT
-> When a programme finishes, if the oven is still hot,
the display shows "HOT", alternating with the time, even if
the knobs are positioned to OFF.
WARNING:
the first operation to carry out after the oven has been
installed or following the interruption of power supply (this is
recognizable the display pulsating and showing
) is setting
12:00
the correct time. This is achieved as follows.
•Push the central button 4 times
•Set time with "-" "+" buttons.
•Release all buttons.
ATTENTION:
The oven will only operate providing the clock is set.
00:00
select
3.3 Setting the correct time
