background image

We  recommend  you  keep  the  instructions  for 
installation and use for later reference, and before 
installing the hob, note its serial number in case 
you need to get help from the after sales service.
WARNING: the appliance and its accessible parts 
become hot during use. Care should be taken to 
avoid touching heating elements. Children under 
8  years  of  age  must  be  kept  away  from  the 
appliance  unless  they  are  continuously 
supervised.
WARNING: use only hob guards designed by the 
Manufacturer  of  the  cooking  appliance  or 
indicated by the Manufacturer of the appliance in 
the instructions for use as suitable or hob guards 
incorporated  in  the  appliance.  The  use  of 
inappropriate guards can cause accidents.
WARNING: unattended cooking on a hob with fat 
or  oil  can  be  dangerous  and  may  result  in  fire. 
NEVER  try  to  extinguish  a  fire  with  water,  but 
switch off the appliance and then cover flame e.g. 
with a lid or a fire blanket.
WARNING: danger of fire: do not store items on 
the cooking surfaces.
WARNING: if the surface is cracked, do not touch 
the glass and switch off the appliance to avoid the 
possibility of electric shock.
This appliance can be used by children aged from 
8  years  and  above  and  people  with  reduced 
physical, sensory or mental capabilities or lack of 
experience  and  knowledge  if  they  have  been 
given supervision or instruction concerning use of 
the appliance in a safe way and understand the 
hazards involved. Children should be supervised 
to ensure that they do not play with the appliance. 
Cleaning  and  user  maintenance  shall  not  be 
made by children without supervision.
CAUTION:  the  cooking  process  must  be 
supervised. A short term cooking process has to 
be supervised continuously.
It is strongly recommended to keep children away 
from the cooking zones while they are in operation 
or  when  they  are  switched  off,  so  long  as  the 
residual heat indicator is on, in order to prevent 
the risks of serious burns.
This appliance is not intended to be operated by 
means  of  an  external  timer  or  separate  remote 
control system.
If present do not to stare into halogen lamp hob 
elements.
Connect a plug to the supply cable that is able to 
bear the voltage, current and load indicated on the 
tag and having the earth contact. The socket must 
be suitable for the load indicated on the tag and 
must be having the earth contact connected and 
in operation. The earth conductor is yellow-green 
in color. This operation should be carried out by a 

SAFETY INSTRUCTIONS

suitably  qualified  professional.  In  case  of 
incompatibility  between  the  socket  and  the 
appliance  plug,  ask  a  qualified  electrician  to 
substitute the socket with another suitable type. 
The plug and the socket must be conformed to 
the  current  norms  of  the  installation  country. 
Connection  to  the  power  source  can  also  be 
made by placing an omnipolar breaker between 
the appliance and the power source that can bear 
the maximum connected load and that is in line 
with current legislation. 
The  yellow-green  earth  cable  should  not  be 
interrupted  by  the  breaker.  The  socket  or 
omnipolar  breaker  used  for  the  connection 
should be easily accessible when the appliance is 
installed.
The  disconnection  may  be  achieved  by  having 
the plug accessible or by incorporating a switch in 
the  fixed  wiring  in  accordance  with  the  wiring 
rules.
If the supply cord is damaged, it must be replaced 
by  Manufacturer,  its  service  agent  or  similarly 
qualified people in order to avoid a hazard. The 
earth  conductor  (yellow-green)  must  be  longer 
than  10  mm  on  the  terminal  block  side.  The 
internal  conductors  section  should  be 
appropriate  to  the  power  absorbed  by  the  hob 
(indicated on the tag). The type of power cable 
must be HO5V2V2-F.
Do not put metallic objects such as knives, forks, 
spoons or lids on the hob. They could heat up.
Aluminum  foil  and  plastic  pans  must  not  be 
placed on heating zones.
After  every  use,  some  cleaning  of  the  hob  is 
necessary  to  prevent  the  build-up  of  dirt  and 
grease. If left, this is recooked when the hob is 
used and burns giving off smoke and unpleasant 
smells,  not  to  mention  the  risks  of  fire 
propagation.
Never  use  a  steam  or  high  pressure  spray  to 
clean the appliance.
Do not touch the heat zones during operation or 
for a while after use.
Never  cook  food  directly  on  the  glass  ceramic 
hob. 
Always  use  the  appropriate  cookware.Always 
place the pan in the center of the unit that you are 
cooking on.
Do not place anything on control panel. 
Do not use the hob as a working surface.
Do not use the surface as a cutting board.
Do not store heavy items above the hob. If they 
drop onto the hob, they may cause damage.
Do not use the hob for storage of any items.
Do not slide cookware across the hob.

0

3

 GB

Summary of Contents for ESQUEMA 1


















Reviews: