Candy CSTG27TET, Manual

Page: 67 / 124

EN
67
Please read these notes:
* Maximum load capacity of dry clothes,
according to the model used (see control
panel).
"
"
The spin speed may also be reduced, to
match any guidelines suggested on the
fabric label, or for very delicate fabrics
cancel the spin completely this option is
available with a spin speed button. This
function can be activated with the button
SPIN SELECTION. If the label does not
indicate specific information, it is possible to
use the maximum spin expected in the
program. An over dosing of detergent can
cause excessive foaming. If the appliance
detects the presence of excessive foam, it
may exclude the spinning phase or extend
the duration of the program and increase
water consumption.
( ) Only with PREWASH option
selected
(programmes with
PREWASH option available).
1) When a programme is selected,
on the display is shown the
display shows the recommended
wash temperature that can be
reduced (where allowed) by the
relevant button.
2) For the programmes shown you
can adjust the duration and
intensity of the wash using the
STAIN LEVEL button.
3) Selecting the RAPID program on
the knob, it will be possible to
select with the RAPID button, one
of the three rapid programs
available among 14’, 30’ and 44’.
l
PREWASH: if the dispenser has the
specific compartment for pre-wash, pour
the detergent in it. Otherwise, pour the
detergent in the perforated area present
on the drum, following the dosage
indications of the detergent producer.
** STANDARD COTTON PROGRAMMES
ACCORDING TO (EU) No 1015/2010 and
No 1061/2010.
COTTON PROGRAMME WITH A
TEMPERATURE OF 60°C.
COTTON PROGRAMME WITH A
TEMPERATURE OF 40°C.
These programmes are suitable to
clean normally soiled cotton laundry and
they are the most efficient programmes
in terms of combined energy and water
consumptions
for washing cotton
laundry.
These
programmes have been
developed to be compliant with the
temperature on the wash label on the
garments
and the actual water
temperature may slightly differ from the
declared temperature of the cycle.
Before closing the cover and start the
washing process, please check that the
internal drum is perfectly closed. When
possible, please align the position
indicators with drum to assure the best
washing performance.
IMPORTANT: do not use the pre-wash
mode with start-delay option.