5
INSTALLATION(VENT OUTSIDE)
If you have an outlet to the outside, your cooker hood can be connected as below
picture by means of an extraction duct (enamel, aluminum, flexible pipe or non-
flammable material with an interior diameter of 120mm)
Before installation, turn the unit off.
Method A(Wall Mounting):
1. The cooker hoods should be placed at a distance of 65-75cm from the cooking
surface for best effect. See Pic 1.
2. To install onto the wall, drill 2 holes of Ø 8mm at a suitable place according to the
centre distance of the holes in the back of the cooker hood.See Pic 2
3. Insert the wall plugs into the holes.
4. Insert the ST4*30mm screws into the wall plugs and tighten.
5. Put up the cooker hood onto the fixed screws.
6. Use the attached accessories enclosed to turn the safety screws into the two holes
inside the hood, and then fix the screws to tighten the hood onto the wall.See pic 3.
7. Put the expansion pipe on the outlet, then lead it outdoors, or use the outlet cover
to seal the outer outlet and open the inner exhaust valve. Note: the expansion pipe
is not included in the product.
65cm
75cm
500mm
Pic 1
Pic
Pic
2
3