EN-9
Always lift pans off the ceramic hob – do not slide, or they may scratch the glass.
Using your Ceramic Hob
To start cooking
1.
Touch the ON/OFF control.
After power on, the buzzer beeps once, all displays show
“ – “ or “ – – “, indicating that the induction hob has entered
the state of standby mode.
2.
Place a suitable pan on the cooking zone that
you wish to use.
•
Make sure the bottom of the pan and the surface
Of the cooking zone are clean and dry.
3.
Touching the heating zone selection control, and
a indicator next to the key will flash.
4.
Set a power level by touching the “-” or “+” control.
•
If you don’t choose a heat setting within 1
minute, the ceramic hob will automatically
switch off. You will need to start again at step 1.
•
You can modify the heat setting at any time
during cooking.
5.
When zone 1 is working, touch the heating zone selection
control then activate double zone by pressing
.
When double zone is working, touch the heating zone selection control then
turning off the double zone by pressing
.