■
Fasten the two supplied frames with 4 of
the 4 x 16 mm diameter screws, setting
them at the center of the eyelets
(fig. 6)
.
■
Hang the panel on the dishwasher door
and align it by adjusting the frames with
the eyelets.
■
Fix the frames with the other 6 screws
4x16 mm in the specif holes
(fig. 6)
.
■
Fasten the panel to the dishwasher door
with the screws 3.5 x 13 mm
(fig. 7)
.
N.B.:
If you wish to fit a wooden panel with
false drawer, ask for special kit to the
Assistance Service.
Wooden panel installation
This dishwasher model is equipped with an
auto-balancing system in the door and
comes ready to mount a wooden panel of
the following size:
Width 596,5 mm max
Height from 645 to 715 mm max
Thickness from 18 to 22 mm max
This allows the use of a regular wing taken
from a drawer furniture weighing from 3 to
7 kg; for coverings weighing more, ask for
information to the Assistance Service.
Drilling arrangements
■
Drill 12 mm deep holes in the panel
using a 2 mm diameter drill according to
the measures indicated in the
figure 5
.
715 max.
645 min.
350
178
596,5 max.
=
=
572
6
7
5
9
2
8
TECHNICAL
NOTES FOR
CABINET FITTERS
This dishwasher model can be embedded
in modular furniture, under a counter top, a
continuous counter top or a sink.
■
The housing dimensions must be the
same as those indicated in the
figure 1
.
■
The adjustable feet allow the height of
the machine to be varied from 820 to
900 mm.
Installation under the counter top
■
Adjust the dishwasher height to adapt it
to the housing
“A”
dimensions, level it
by means of the adjustable feet
(fig. 2-3)
.
■
Insert the dishwasher in the housing and
connect the dishwasher to water and
power following the instruction booklet;
if necessary, re-adjust the front and rear
feet.
■
Fasten the dishwasher with the supplied
16 mm long screws
“A”
, as indicated in
the
figure 4
.
600
570
550
550
597
100
40
820+(80)
100
170
+(80)
820+(80)
160
598
1
3
4
