15
15
CONNECTION/REPLACING THE POWER SUPPLY CABLE
Important! This cooktop must be connected to the electricity supply only by an
authorised person.
•
Turn the cooktop over and unhook the terminal board cover by inserting a screwdriver
into the two hooks “
A
” (fig. 2.1).
•
Open the cable gland by unscrewing screw “
F
” (fig. 2.3), unscrew the terminal screws
and remove the cable.
•
The new supply cable, of suitable type and section, is connected to the terminal board
following the diagram in fig. 2.2.
•
Close the cover of the terminal board (check the two hooks “
A
” are correctly hooked).
NOTE: The earth conductor must be left about 3 cm longer than the others.
The operations must be executed by a qualified technician.
A
F
Fig. 2.1
Fig. 2.3
Models provided with power supply
cable. WARNING: If the power supply
cable is damaged, it must be replaced
only by an authorised service agent in
order to avoid a hazard.
220-240 V ac
E
N
L
E Earth
N Neutral
L Live
SECTION OF THE SUPPLY CABLE
TYPE “H05RR-F”
or
“H05V2V2-F”
(resistance to
temperatures of 90°C)
220-240 V ac (V 2 ac) 3 x 1,5 mm
2
(*) (**)
(*) Connection possible with plug and outlet.
(**) Connection with wall box connection.
Fig. 2.2
220-240 V ac (V 2 ac)