13
13
D
D
Adhesive side
Fig. 1.5
C
B
A
B
A
Fig. 1.4
IMPORTANT: Spread
the sealing material “D”
around the edge of the
hob (edge of the glass).
The sealing material
“D” must be installed
correctly to guarantee a
perfect seal between the
appliance and the unit.
Incorrect installation may
cause irreparable damage
to the appliance.
Adhesive side
FASTENING THE COOKTOP
Each cooktop is provided with an installation kit including brackets and screws for fastening
the cooktop to benches
from 20 mm thick. Before you install the cooktop, make sure that
the work surface is square and level, and no structural members interfere with space
requirements previously indicated.
The kit includes four metal clips “
B
” and 4 self-threading screws “
A
” (fig. 1.4).
•
Cut the unit according to the dimensions in fig. 1.1a and 1,1b.
•
Turn the hob upside down and rest the glass side on a soft surface.
•
Spread the seal “
D
” around the edge of the hob (fig. 1.5).
•
Fasten the metal clips “
B
”
into the hole “
C
” using the screws
A
”. Make sure that the
metal clips are mounted correctly as shown in the figure 1.4.
•
Put the cooktop into the cutout and position it correctly.
•
Using a sharp cutter or trimmer knife, trim the excess sealing material around the edge
of the cooktop. Take care not to damage the workbench.
•
In case to install the hob flush with the work surface, fill any gaps between the glass
and along the perimeter of the work surface with insulating silicone, and wipe away
any excess.
Glass
Fixing spring
Fixing screw
Worktop / kitchen cabinet
Seal “D”