background image

Plug it in
Plug the appliance into the power socket.
If the plug we supply does not fit
• CUT IT OFF AND DESTROY IT!
You can't use it on other appliances, and the exposed wires could be
dangerous if anyone plugged it in.
• Fit a suitable plug, as follows:

Connect

to the terminal in the plug

green and yellow wire

marked with the letter E,
OR marked with the Earth symbol,
OR coloured green,
OR coloured green and yellow.

blue wire

marked N
OR coloured black.

brown wire

marked L
OR coloured red.

Safety Instructions

INSTALLATION

After unpacking, adjust the height of the dishwasher.
For the dishwasher to work correctly it must be level. Adjust the feet so
that the machine does not tilt by more than 2 degrees. If it you need to
move the machine after removing the packaging, do not try to lift it by
the bottom of the door. Follow the instructions in figure 8. Open the door
slightly and lift the machine by holding on the top.
Important: when the appliance location is on carpet floors, attention
must be paid so as to ensure that there is no obstruction to the
bottom vents.
Make sure that the plug on the appliance remains accessible after
installation.

This appliance complies with Directives 89/336/EEC, 73/23/EEC
and following changes.

For U.K. only (240 V)

Please read the instructions in this booklet carefully because they contain
important information on how to install, use and maintain your dishwasher safely
as well as containing useful tips on how to make the most of it.
Keep this booklet carefully for future reference.

There are certain basic safety rules which are valid for any domestic appliance.
They are the following:

-

never touch the appliance when your hands or feet are wet or damp

-

do not use it when your feet are bare

-

do not remove the plug from the mains supply socket by pulling the mains
cable or the machine itself

-

do not leave the appliance exposed to the elements (rain, sun etc)

-

do not let children (or others incapable of operating it) use the machine
without supervision

-

make sure that the plug fitted to the machine is compatible with the power
supply socket. If it is not, get a suitably qualified person to fit the correct type,
and to make sure that the cables to the mains socket are able to cope with
the power rating of the appliance

-

ensure that the dishwasher does not crush power cables

-

if there is a water softening device installed in the home there is no need to add
salt to the water softener fitted in the dishwasher

-

the dishwasher is designed for normal kitchen utensils.
Objects that have been contamined by petrol, paint, traces of steel or iron,
corrosive chemicals, acids or alkalis must not be washed in the dishwasher

-

if you wish to dispose of an old dishwasher be careful to remove the door to
eliminate the risk of children becoming trapped inside it

-

the dishwasher has been made from materials which can be recycled so that
it can be disposed of in an environmentally friendly way

-

in general it is not advisable to use adaptors, multiple plugs and/or extension
cables

If the appliance breaks down or stops working properly, switch it off, turn off the
water supply and do not tamper with it. Repair work should only be carried out
by an approved service agent and only genuine spare parts should be fitted.
Any failure to follow the above advice may have serious consequences for the
safety of the appliance.

Contents

Electrical connection (220-230 V)

This appliance complies with all the international safety standards and
is fitted with a 3 pin plug with  earth   connection   to   ensure   complete
earthing of the product.
In the absence of adequate earthing you will notice that when touching
the metal parts of your appliance an electrical dispersion can be felt due
to the presence of a radio interference suppressor.
Before connecting the appliance to the mains supply it is important to
ensure:
– That  the  supply  socket is properly earthed.
– That your electricity supply is capable of  meeting   the  consump-

tion  requirements  listed  on the rating plate of your appliance.

Important: manufacturer declines all responsibility for any damages
due to nonearthing of the machine.

44

Installation diagrams

Safety instructions

Installing the machine

Using your dishwasher

Maintenance

What to do if something goes wrong

Page    2

Page  44

Page  45

Page  48

Page  61

Page  62

45

Summary of Contents for A 9002

















Reviews: