C&T VCO-6000-KBL Series, User Manual

Page: 48 / 99

VCO-6000- KBL | User’s Manual
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing.
3.2 Disconnecting expansion module from computing module
1. Remove the 4 connecting brackets on the top side of the system and the 4 brackets on the
bottom side.
2. Now you can separate the expansion module from the computing module.
48
Chapter 3: System Setup
In order to prevent electric shock or system damage, before removing the
chassis cover, must turn off power and disconnect the unit from power source.
W
ARN
IN
G
Top Side
Bottom Side