C&T Solution VIO-110R/MX100, User Manual

Page: 34 / 36

VIO-100(200)/MX100
l User’s Manual
34
3.1 Set torque force to 3.5 kgf-cm to execute all the screwing and
unscrewing.
3.2 Connecting MX100 monitor module with VIO display module
1. Hold the monitor module with its connector facing towards the connector on the back of VIO
display module.
2. Press the monitor module downward to ensure two modules are firmly connected.
Chapter 3: System Setup
In order to prevent electric shock or system damage, before removing the
chassis cover, must turn off power and disconnect the unit from power source.
W
ARNING