C&T Solution VIO-110R/MX100, User Manual

Page: 19 / 36

VIO-100(200)/MX100
l User’s Manual
DC IN
Used to plug a DC power input with terminal
block.
DVI-D
This 24-pin port is for PC (Personal Computer)
DVI-D digital signal connection.
VGA
Use the rear panel standard 15-pin female VGA
connector to connect the monitor to the system
graphics interface.
DisplayPort
The DisplayPort connector connects to a display
device with DisplayPort interface.
COM Port for Touch Panel Connector (Resistive
Touch Only)
Use the rear panel female DB-9 touch panel
connector to connect the monitor to the system
interface.
USB for Touch Panel Connector
Use the rear panel standard USB touch panel
connector to connect the monitor to the system
interface.
Audio-in
This port connects PC audio source by the
bundled audio cable.
19
1.2 System I/O
1.2.1 Rear
Chapter 1: Product Introductions
1.2.2 Side (Right)
PC/CAR mode select switch
Used to select PC or CAR power mode
12V/24V mode select switch
Used to select 12V or 24V Car power input
voltage
DELAY TIME switch
Used to select Car power turn off delay-time
Power LED
Indicates the power status of the monitor.
Suspend LED
Indicates the suspend mode of the monitor.