background image

38

 LaserLight LT 1550 Technical Manual

Laser LT Remote Display Limited Warranty

Rice Lake Weighing Systems (RLWS) warrants that all RLWS equipment and systems properly installed by a 
Distributor or Original Equipment Manufacturer (OEM) will operate per written specifications as confirmed by the 
Distributor/OEM and accepted by RLWS. All systems and components are warranted against defects in materials 
and workmanship for two years. 

RLWS warrants that the equipment sold hereunder will conform to the current written specifications authorized by 
RLWS. RLWS warrants the equipment against faulty workmanship and defective materials. If any equipment fails 
to conform to these warranties, RLWS will, at its option, repair or replace such goods returned within the warranty 
period subject to the following conditions:

Upon discovery by Buyer of such nonconformity, RLWS will be given prompt written notice with a
detailed explanation of the alleged deficiencies.

Individual electronic components returned to RLWS for warranty purposes must be packaged to
prevent electrostatic discharge (ESD) damage in shipment. Packaging requirements are listed in a
publication, 

Protecting Your Components From Static Damage in Shipment

, available from RLWS

Equipment Return Department.

Examination of such equipment by RLWS confirms that the nonconformity actually exists, and was
not caused by accident, misuse, neglect, alteration, improper installation, improper repair or improper
testing; RLWS shall be the sole judge of all alleged non-conformities.

Such equipment has not been modified, altered, or changed by any person other than RLWS or its duly
authorized repair agents.

RLWS will have a reasonable time to repair or replace the defective equipment. Buyer is responsible
for shipping charges both ways.

In no event will RLWS be responsible for travel time or on-location repairs, including assembly or
disassembly of equipment, nor will RLWS be liable for the cost of any repairs made by others.

T

HESE

 

WARRANTIES

 

EXCLUDE

 

ALL

 

OTHER

 

WARRANTIES

EXPRESSED

 

OR

 

IMPLIED

INCLUDING

 

WITHOUT

 

LIMITATION

 

WARRANTIES

 

OF

 

MERCHANTABILITY

 

OR

 

FITNESS

 

FOR

 

A

 

PARTICULAR

 

PURPOSE

. N

EITHER

 RLWS 

NOR

 

DISTRIBUTOR

 

WILL

IN

 

ANY

 

EVENT

BE

 

LIABLE

 

FOR

 

INCIDENTAL

 

OR

 

CONSEQUENTIAL

 

DAMAGES

RLWS 

AND

 

BUYER

 

AGREE

 

THAT

 RLWS’

S

 

SOLE

 

AND

 

EXCLUSIVE

 

LIABILITY

 

HEREUNDER

 

IS

 

LIMITED

 

TO

 

REPAIR

 

OR

 

REPLACEMENT

 

OF

 

SUCH

 

GOODS

. I

N

 

ACCEPTING

 

THIS

 

WARRANTY

THE

 

BUYER

 

WAIVES

 

ANY

 

AND

 

ALL

 

OTHER

 

CLAIMS

 

TO

 

WARRANTY

.

S

HOULD

 

THE

 

SELLER

 

BE

 

OTHER

 

THAN

 RLWS, 

THE

 

BUYER

 

AGREES

 

TO

 

LOOK

 

ONLY

 

TO

 

THE

 

SELLER

 

FOR

 

WARRANTY

 

CLAIMS

.

N

O

 

TERMS

CONDITIONS

UNDERSTANDING

OR

 

AGREEMENTS

 

PURPORTING

 

TO

 

MODIFY

 

THE

 

TERMS

 

OF

 

THIS

 

WARRANTY

 

SHALL

 

HAVE

 

ANY

 

LEGAL

 

EFFECT

 

UNLESS

 

MADE

 

IN

 

WRITING

 

AND

 

SIGNED

 

BY

 

A

 

CORPORATE

OFFICER

 

OF

 RLWS 

AND

 

THE

 B

UYER

.

© Rice Lake Weighing Systems, Inc. Rice Lake, WI USA. All Rights Reserved.

RICE LAKE WEIGHING SYSTEMS • 230 WEST COLEMAN STREET • RICE LAKE, WISCONSIN 54868 • USA

Summary of Contents for Laser LT RD-1550













































Reviews: