background image

C & K is a registered trademark of C & K Components, Inc.
Sierra and SpreadNet are registered trademarks of C & K Systems, Inc.
All other trademarks are the property of their respective owners.
Copyright 1999 C & K Systems, Inc.

FCC   NOTICE

The Model SN962-PENDANT Two Button Panic generates and uses radio
frequency energy.  If not installed and used in accordance with the
manufacturer's instructions, it may cause interference to radio and televi-
sion reception.   The Pendant Transmitter has been tested and found to
comply with the specifications in Part 15 of FCC Rules for Class B
Computing Devices and FCC Part 15 Subpart C, Specifications for Inten-
tional Spread Spectrum Radiators.

If this equipment causes interference to radio or television reception - which
can be determined by turning the equipment on and off - the installer is
encouraged to correct the interference by one or more of the following
measures:  1)  Reorient the antenna of the radio/television.  2)  Connect the
AC transformer to a different outlet so the control panel and radio/television
are on different branch circuits.  3)  Relocate the control panel with respect
to the radio/television.

If necessary, the installer should consult an experienced radio/television
technician for additional suggestions, or send for the "Interference Hand-
book" prepared by the Federal Communications Commission.  This booklet
is available from the U.S. Government Printing Office, Washington D.C.,
20402, stock number 004-000-00450-7.

CAUTION:  C & K does not support field changes or modifications to any of
the SpreadNet RF equipment unless they are specifically covered in this
manual.  All adjustments must be made at the factory under the specific
guidelines set forth in our manufacturing processes.  Any modification to the
equipment could void the user's authority to operate the equipment and
render the equipment in violation of FCC Part 15, Subpart C, 15.247.

This device complies with Part 15 of the FCC Rules.  Operation is subject
to the following two conditions:  (1)  this device may not cause harmful
interference, and (2)  this device must accept any interference received,
including interference that may cause undesired operation.

Industry Canada

This device complies with RSS-210 of Industry Canada.  Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept any interference, including
interference that may cause undesired operation of the device.

SPECIFICATIONS

Dimensions:
8.4 cm x 5.25 cm x 1.9 cm
(3.31" L x 2.06" W x 0.75" D)

Weight:
57 g (2 oz.)

Operating frequency:
902 - 928 MHz Spread Spectrum

Supervisory Rate:
30 - 300 sec (10 sec intervals)
0 is unsupervised

Input power:
one 6 VDC 1/2AA lithium battery

Output power:
10 mW maximum
transmitting period - 7.6 mSec

Replace batteries only with:
C & K Model # SN60L-BAT
Duracell XL PX 28L

Operating environment:
0° to 60° C (32° to 140° F);
up to 95% relative humidity
(non-condensing)

RF emission standards:
USA:
  FCC Part 15
FCC Certification Number:  C2DLWSN-61-KF
CANADA:  Industry Canada
IC Certification Number:  1140 102 615

DESCRIPCIONES DETALLADAS

Tamaño:
8.4 cm x 5.25 cm x 1.9 cm

Peso:
57 g

Frecuencia de operación:
902 - 928 MHz Spread Spectrum

Intervalo de Supervisión
30 - 300 seg (intervalos de 10 seg.)

0 es supervisado

Entrada de corriente:
uno 6 VDC 1/2AA batería

Rendimiento de poder:
10 mW máximo
tiempo de transmisión- 7.6 mSec

Se reponen las baterías unicamente con:
C & K número de modelo SN60L-BAT
Duracell XL PX 28L

Ambiente de operación:
0° to 60° C;
hasta 95%humedad relativa
(no condensar)

RF normas de emisiones:
E.E.U.U.:
  FCC Parte 15
FCC Certification Number:  C2DLWSN-61-KF
CANADA:  Industria Canada
IC Certification Number:  1140 102 615

IMPORTANT NOTES

Batteries should be replaced following a low battery indication
or every 3 years, whichever occurs first.

For continued reliability, the SN962-PENDANT should be
tested at least once per month.

NOTAS IMPORTANTES

Las baterías se deben reponer después que se vea la
indicación de batería baja o cada 3 años, según lo que suceda
primero.

Para que alcance un rendimiento mejor, el SN962-PENDANT
se debe probar una vez por mes.

US Patents 4,977,577;  5,067,136;  4,581,606 PCT/US95/
02690; 5,457,713 PCT/US95/04731; 5,265,120; 08/560,304;
5,408,217;  and  5,119,396

P/N  5-051-562-00  Rev B

http://www.cksys.com

Reviews: