Operation of wireless remote control
Names and functions of wireless remote control
Notice: This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model dosen't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
Remote control
8
TIMER ON BUTTON
TIMER ON
●
Timer On setting: Signal “ON” will blink
and display, signal
will conceal, the
numerical section will become the timer on
setting status. During 5 seconds blink by
pressing
＋
or
－
button to adjust the time
value of numerical section, every press of
that button, the value will be increased or
decreased 1 minute. Hold pressing
＋
or
－
button, 2 seconds later it quickly
change, the way of change is During the
initial 2.5 seconds, ten numbers change in
the one place of minute, then the one
place is constant, ten numbers change in
the tens place of minute at 2.5 seconds
speed and carry. During 5s blink press the
Timer button, the timer setting succeeds.
The Timer On has been set up repress the
timer On button, the Timer On will be
canceled. Before setting the Timer, please
adjust the Clock to the current actual time.
TIMER OFF
SWING UP AND DOWN BUTTON
●
Press this button, to set up swing angle,
which circularly changes as below:
OFF
This is an universal use remote controller. If
remote controller sends the following three
kinds of status that the swing status of main
unit will be:
When the guide louver start to swing up and
down, if turn off the Swing, the air guide louver
will stop at current position.
which indicates the guide louver swings up
and down between that all five positions.
TIMER OFF BUTTON
● Once press this key to enter into
TIMER OFF setup, in which case the
TIMER OFF icon will blink. The method of
setting is the same as for TIMER ON.
