C&H AIR-MASTER SeriesCH-S07RX4, Owner'S Manual

Page: 14 / 87

12
Function introduction for combination buttons
Child lock function:
Press "+"and "-" simultaneously to turn on or turn off child lock function. When child
lock function is on," " icon is displayed on remote controller. If you operate the remote
controller, it won’t send signal.
Temperature display switchover function:
Under OFF status, press "-" and “MODE” buttons simultaneously to switch temperature
display between
℃
and
℉
.
Operation guide
1. After putting through the power, press "ON/OFF" button on remote controller to turn on
the air conditioner.
2. Press "MODE" button to select your required mode:AUTO,
COOL, DRY, FAN, HEAT.
3. Press "+" or "-" button to set your required temperature. (Temperature can’t be
adjusted under auto mode).
4. Press "FAN" button to set your required fan speed: auto, low, medium and high speed.
5. Press " " button to select fan blowing angle.
Replacement of batteries in remote controller
1. Press the back side of remote controller marked with
of battery box along the arrow direction.
2. Replace two 7# (AAA 1.5V) dry batteries, and make
sure the position of "+" polar and "-" polar are correct.
3. Reinstall the cover of battery box.
signal sender
battery
reinstall
remove
Cover of battery box
Note:
● During operation, point the remote control sign al sender at the receiving window on indoor
unit.
● The distance between signal sender and receiving window should be no more than 8m, and
there should be no obstacles between them.
telephone; remote controller should be close to indoor unit during operation.
● Replace new batteries of the same model wh en replacement is required.
● When you don’t use remote controller for a lon g time, please take out the batteries.
● If the display on remote controller is fuzzy or there ’s no display, please replace batteries.
" "