6
Th
e d
at
a a
n
d i
nf
or
m
at
io
n s
h
ow
n i
n t
h
is
m
an
u
al
m
ay b
e c
h
an
g
ed b
y C
A
M
E c
an
ce
lli
a
ut
o
m
at
ic
i s
.p
.a
. a
t a
ny t
im
e w
ith
ou
t p
ri
or w
ar
n
ing
EN
Before installing, do the following:
•
Make sure that the sport where the device will be secured is protected from impacts. Secure the device using
suitable screws, plugs, and so on for the type of surface;
•
Make sure you have a suitable omnipolar cut-off device with contacts more than 3 mm apart, and independent
(sectioned off) power supply;
•
Make sure that any connections inside the case (that provide continuance to the protective circuit) be fi tted
with extra insulation as compared to the other conductive parts inside;
•
Make sure you have suitable tubing and conduits for the electrical cables to pass through and be protected against
mechanical damage;
5 .1 Preliminary checks
5.2 Tools and materials
Make sure you have all the tools and materials you will need for the installation at hand to work in total safety and
compliance with the current standards and regulations. The following figure illustrates the minimum equipment
needed by the installer.
5 Installation
Intelligent Security & Fire Ltd.
