4
5
Water and Time Consumed During Regeneration
Backwash
Minutes
Rapid Rinse
Minutes
Total Time of
Regeneration
Total Water
Consumed during
Regeneration (GAL)
(Birm, TO, Neu)
Total Water Consumed
during Regeneration
(GAL) (MM)
Total Water Consumed
during Regeneration (GAL)
(nextSand)
75
10
10
20
70
80
100
100
10
10
20
80
100
140
150
10
10
20
100
140
200
Model
Media
Cu Ft
Flow Rate USGPM
Micron
Rating
Mineral
Tank Size
Pipe Size
Inches
Ship
Weight
Lbs
Service Peak Backwash
Iron Filters - Birm
HT 565BM-75
0.75
3.0
4.0
3.5
8 x 44 3/4” and 1”
67
HT 565BM-100
1.0
3.0
5.0
4.0
9 x 48 3/4” and 1”
79
HT 565BM-150
1.5
4.0
8.0
5.0
10 x 54 3/4” and 1”
101
Taste & Odor Filters
HT 565TO-75
0.75
4.0
5.0
3.5
8 x 44 3/4” and 1”
50
HT 565TO-100
1.0
4.0
6.0
4.0
9 x 48 3/4” and 1”
60
HT 565TO-150
1.5
5.0
7.0
5.0
10 x 54 3/4” and 1”
78
Neutralizing Filters
HT 565NU-75
0.75
2.0
4.0
3.5
8 x 44 3/4” and 1”
93
HT 565NU-100
1.0
3.0
6.0
4.0
9 x 48 3/4” and 1”
120
HT 565NU-150
1.5
4.0
10.0
5.0
10 x 54 3/4” and 1”
164
Sediment Turbidity Multi-Media Filters
HT 565MM-75
0.75
4.0
5.0
4.0
15 -20 µ 8 x 44 3/4” and 1”
79
HT 565MM-100
1.0
5.0
7.0
5.0
15 -20 µ 9 x 48 3/4” and 1”
118
HT 565MM-150
1.5
7.0
10.0
7.0
15 -20 µ 10 x 54 3/4” and 1”
144
NextSand Turbidity Filters
HT 565NEX-75
0.75
4.0
6.0
3.5
3 - 5 µ
8 x 44
1/2" - 1"
90
HT 565NEX-100
1.00
5.0
8.0
4.0
3 - 5 µ
9 x 48
1/2" - 1"
135
HT 565NEX-150
1.50
8.0
10.0
5.0
3 - 5 µ 10 x 54
1/2" - 1"
175
SPECIFICATION
Working Temperature = 34-110°F (1-43°C)
(Do not subject the unit to freezing temperatures)
Working Pressure = 30-125 PSIG (137-861 kPa)
Voltage = 120V / 60 Hz
Pipe Size = 3/4” and 1”
• At the stated service flow rates, the pressure drop
through these devices will not exceed 15 psig.
• The manufacturer reserves the right to make
product improvements which may deviate from the
specifications and descriptions stated herein, without
obligation to change previously manufactured products
or to note the change.
* Do not use water that is microbiologically unsafe
without adequate disinfection before or after the
system.
Peak flow rates intended for intermittent use only (10
minutes or less) and are for residential applications only.
Do not use peak flow rate for commercial applications
or for a continuous rate when treated water supplies are
geothermal heat pump, swimming pool, etc.
For satisfactory operation, the pumping rate of the
well system must equal or exceed indicated backwash
flow rate.
All units come with plastic bypass
