background image

Instruction Manual for “XFS” Light

Commercial Wall Exhaust Fans 

Read Instructions Completely Before Installation & Save For Reference

Congratulations on the purchase of your quality built direct drive, wall exhaust ventilation fan.  Used for general exhaust ventilation, these 

fans come fully assembled and 100% of fans are tested for proper operation before shipping.

“XFS” Exhaust Fans:

These models have a rugged, welded steel box housing with a powder coated finish and aluminum exhaust louvers.  The louvers open 

automatically when the fan starts up and close when the fan stops.

   XFS-M  03/03/21 

    Page  2 of 2

  

WARNING:  FAN IS GUARDED ON INTERIOR.  EXTERIOR SHOULD BE MOUNTED AT LEAST 

   

2.5 METERS ABOVE GRADE LEVEL OR PROPERLY GUARDED FROM ACCIDENTAL  

   

CONTACT OF THE BLADE THROUGH THE LOUVERS.

MAINTENANCE

Motor, blade and louvers should be kept clean of any buildup to prevent premature motor failure and to achieve proper performance.  

Automatic louvers should be kept operating freely.  As with all mechanical equipment scheduled inspections should include checking that 

all hardware is secure and blade set screws are tight.

DO NOT PRESSURE WASH THE FAN.

CANARM LTD. 

  CANARM LTEE. 

 ARTHUR MANUFACTURING FACILITY

2157 PARKEDALE AVE. PO BOX 367    2555 RUE BERNARD LEFEBVRE 

#7686 CONCESSION 16, RR4

BROCKVILLE, ONTARIO K6V 5V6 

  LAVAL, QUEBEC  H7C 0A5 

ARTHUR, ONTARIO  N0G 1A0

TELEPHONE: (613) 342-5424 

  TELEPHONE:  (450) 665-2535 

TELEPHONE:  (519) 848-3910

FAX: 1-800-263-4598 

  FAX:  (450) 665-0910 

 

FAX:  (519) 848-3948

 

   

WARNING

Moving parts,

disconnect 

power before 

servicing.

!

INSTALLATION

Installation is fast and simple.  A sturdy framed wall opening should be prepared in advance to the size indicated for your fan in the charts 

above.  With lag bolts for wooden frames or nut, bolt and lock washers for steel frames, secure the fan using the four mounting holes 

provided, one in each corner of the fan.

OPERATION

The fan has a cord and grounded plug.  Plug the fan into a 115 Volt socket.  Use the pull chain to turn fan off and adjust speed.

WARNING: 

MOTORS ARE EQUIPPED WITH AUTOMATIC OVERLOAD PROTECTION AND MAY RESTART 

                 WITHOUT WARNING. ALWAYS DISCONNECT FROM POWER BEFORE ATTEMPTING SERVICE. 

 

Reviews: