background image

CANARM LTD.

2157 Parkedale Ave.

Brockville, Ontario

K6V 5V6

PH: 613-342-5424

FX: 613-342-8437

CANARM LTÉE.

2555 Rue Bernard Lefebvre

Laval, Quebec

H7C 0A5

PH: 450-665-2535

FX: 450-665-0910

ROYAL COLLECTION FANS LIMITED LIFETIME WARRANTY

“THANK YOU” for purchasing a Canarm product.  It is our policy to furnish you 
with high quality products at a fair price.  With proper installation your fan should 
provide you with years of money saving comfort.

The electrical motor in this product is warranted against defects in workmanship 
and material for as long as the original purchaser owns the product. All other parts 
ie: (switches, capacitors,blades, blade brackets and the finish) are warranted for a 
period of one year.

All defective product returned to Canarm will require a RA# (return authorization 
number) which can be obtained by calling Canarm Customer Service Department 
at 1-800-265-1833. Returned product must be accompanied by a copy of your 
proof of purchase. 

All product being returned must be shipped freight prepaidto Canarm and Canarm 
will in turn return the product back prepaid.Canarm does not cover the cost to 
remove or re-install any defective product.

WARRANTY VOID:  In cases of alteration, abuse, installation not in accordance 
with instructions or REMOVAL of the cUL Sticker.

Summary of Contents for NOUVEAU










Reviews: