pg. 11
6. MOUNTING BLADE BRACKETS TO BLADES
INSTALLATION
A. “DIECAST” BLADE BRACKETS
• obtain hardware package containing blade bracket screws and washers.
• place fibre washer over screw.
• place screw through blade hole and slip a rubber washer over the screw.
• align screw with blade bracket and secure.
• repeat for other two screws.
• once all blade brackets are attached to blades double check that screws are tight.
NOTE: Rubber washers only supplied on those fans with high gloss blades
B. “MEDALLION STYLE” BLADE BRACKETS
• obtain hardware package containing blade bracket screws and washers.
• place fibre washer over screw.
• place rubber washers in holes of blades.
• position bottom blade bracket and top blade bracket with blade.
• start screws and fibre washers by placing into top blade bracket and blade
and threading into the bottom bracket.
• tighten screws only after the 3 screws have been started and blade brackets
are straight on the blades.
pg. 12
6. MOUNTING BLADE BRACKETS TO BLADES TO MOTOR
INSTALLATION
NOTE: Choice of 4 or 5 blades (option on some fans)
Some fans offer the option of four or five blade operation. In these cases there will
be two rows of screw holes in the motor casing. The inside row will contain 8 holes
for 4 blades and the outside row will contain 10 holes for 5 blade use.
• obtain hardware containing motor screws and lock washers.
• place lock washers over motor screws, position motor screws in blade
brackets,and secure to motor.
• make sure all screws are tightened securely.
NOTE: On those fans with an extra
wide switch housing cover there will
be a cut out section provided allowing
access to screws when installing the
blade brackets.
NOTE: Fan comes with THREE RUBBER
STOPS on motor for shipping purposes
only. Remove stops before installing the
blades to the motor.
blade bracket screw
blade bracket
blade
fibre washer
rubber washer
fibre washer
blade bracket screw
blade
bottom
blade bracket
top
blade bracket
rubber washer
inside holes
outside holes
motor
lock washer
motor screw
cut out section
switch housing
cover
remove rubber stops
Summary of Contents for BUILDER
Page 2: ......
