4000 AVE. PINARD,
ST-HYACINTHE,
QUÉBEC, CANADA,
J2S 8K4,
TEL: 450-383-4000,
FAX: 450-383-4004
www.ventecventilation.com
Sept. 8, 2016
PAGE 14 OF 17
REV 4
6.1.4
CHECK-UP BEFORE STARTING
Verify that all wood shims are remove at the end of each blade of the propeller.
Make sure there is no condensation or risk of condensation into the controller.
GROUNDIN
G
IS
VERY
IMPORTAN
T
FOR
PEOPLE
AND
ELECTRONI
C
SAFETY.
Be sure that the buildings electrical system is properly grounded.
VFD Note: There are 2 grounding points that are each marked PE. Land the motor ground lead and the
mechanical ground lead properly!
Be sure to terminate the ground systems per the VFD instruction manual.
6.2
MANUAL CONTROL SYSTEM
Requires one Class 2, 3-conductor PLC cable connected between the VFD and the remote speed control. The VFD
provides the 10V DC power source for this 3-wire control loop.
$#"! !!#"!"!#!!#"#!!!
;
Use AWG #20 stranded copper f
!#"!!!
, and;
$#"! !!#"!"!!#"!!!
6.3
AUTOMATIC CONTROL SYSTEM
Specific directions will be provided for the Automatic Control System Options.
7
WARRANTY
CANARM Ltd. warrants every new fan to be free of defects in material and workmanship, to the extent that, within
a period of one year from the date of purchase CANARM Ltd. shall either repair or replace at CANARM’s option,
any unit or part thereof, returned freight prepaid, and found to be defective.
This warranty does not include any labour or transportation costs incidental to the removal and reinstallation of
the unit at the user’s premises.
Components repaired or replaced are warranted through the remainder of the original warranty period only.
This warranty applies to the original purchaser-user only; it is null and void in case of alteration, accident, abuse,
neglect, and operation not in accordance with instructions.
NOTICE: No warranty claims will be honored by CANARM Ltd. unless prior authorization is obtained.
PUTTING INNOVATION TO WORK
7686 16 Line, Arthur, ON.
N0G 1A0
Email: [email protected]
Tel: 1-800-263-5314
Fax: 519-848-3948
www.canarm.com
Summary of Contents for AgSystems CYCLONE PLUS
Page 2: ......
