CANAM TECHNOLOGY, INC. (CTI)
MARK-IV UHF NARROWBAND SIGNAL BOOSTER
USER’S MANUAL
Page 4 of 12
Rev0 May/2011
The built-in Web Server provides a Graphical User Interface (GUI) to ease in
remote monitoring & control. Access is obtained via a PC’s Web Browser
and a TCP/IP connection to the Unit. The system can be connected directly
to a PC computer or can be plugged into the local area network.
Some pages shown by the Web Server are the following:
“Main Status”: depicts status alarm indicators and meters.
“Main Settings”: is used to configure system-level macro settings.
“Filter Settings” contains the settings that can be configured for each
filter window.
Never operate the system without adequate Load/Termination on the RF Tx
Output. The UHF Narrowband Signal Booster will amplify until 120dB gain any
input stimulus greater than Rx Threshold level (Squelch).
The Web Server allows to Mute/Unmute Power Amplifier in “Main Settings”
page. Make sure the power amplifier is unmuted before start with the test.