5 Unpackaging and Inspection
5 / 18
5 Unpackaging and Inspection
Before unpacking the inverter, check the package appearance thoroughly, such as any holes and cracks, and check the
inverter model accordingly. If discover any damage to the packaging which indicates the inverter may have been
damaged, or the inverter model is not what you requested, do not unpack the product and contact your dealer
immediately.
After opening the package, check all of the accessories carefully in the carton. If any damage is found or any
component is missing, contact your dealer.
Notice:
1)
For component details, see the packing list document in the packing case.
2)
Need two person to carry.
6 Installation
6.1 Basic Installation Requirements
1) Do not install the inverter on the structures constructed of flammable or thermolabile materials.
2) The installation surface must be strong enough to bear the inverter's weight for a long period time. (Please check
the inverter’s weight in the product specification of ANNEX B).
3) The inverter is protected to IP65, can be installed indoors and outdoors.
4) The humidity of the installation location should be below 100% without condensation.
5) The ambient temperature should be between -25°C to 60°C.
6) Install at eye-level for easy operation.
7) Do not install the inverter near television antenna or any other antennas and antenna cables.
8) Ensure the inverter is out of children's reach.
9) Install inverter at the locations with some cover or protection, to ensure the optimum operation, as per FIG.6-1.
10) Do not install in small closed cabinet where air cannot circulate freely. Do not put any other objects on the inverter,
as per FIG.6-2.
FIG.6-1 Inverter Installation Positions FIG.6-2 Forbid to Install in Small Closed Cabinet
11) Comply with the Min. clearance to walls, other inverters, or objects to ensure the installation and maintenance,
meanwhile for the good heat dissipation.
