7
Part 2
SPECIFICATIONS
Item:
Seating Capacity
Spa Dimension (inner)
Spa Dimension (outer)
Water Capacity
Voltage
Heater
Massage Jet Pump
Filter Pump
Max. Heat Temperature
Spa Lid Material
Liner
Net Weight
Gross Weight
Package Dimensions
Test Certificate
Heating Efficiency (Ambient temperature is 68°F /20°C℃)
5-6 Persons
63’’ x 29” (160 x 73cm)
73” x 29” (184 x 73cm)
1000L / 264 US gal
115V 60Hz
1380W
L1: 400W, L2: 650W, L3: 850W
30W
104°F (40°C)
Polyester Laminated PVC, Synthetic Leather
Polyester Laminated PVC
101lbs / 45.5kg
114lbs / 52kg
#1: 30” x 22” x 25” / 75 x 55 x 62cm
#2: 43” x 29” x 30” / 110 x 73 x 76cm
CETL/ETL
1.5-2℃(°F) /hr
Item:
Seating Capacity
Spa Dimension (inner)
Spa Dimension (outer)
Water Capacity
Voltage
Heater
Massage Jet Pump
Filter Pump
Max. Heat Temperature
Spa Lid Material
Liner
Net Weight
Gross Weight
Package Dimensions
Test Certificate
Heating Efficiency (Ambient temperature is 68°F /20°C℃)
4-5 Persons
55’’ x 29” (164 x 73cm)
65’’x 29’’ (180 x 73cm)
820L / 214 US gal
115V 60Hz
1380W
L1: 400W, L2: 650W, L3: 850W
30W
104°F (40°C)
Polyester Laminated PVC, Synthetic Leather
Polyester Laminated PVC
92.5lbs / 42kg
105lbs / 48kg
#1: 27’’ x 22’’ x 25’’ / 69 x 55 x 62cm
#2: 43” x 26” x 30” / 110 x 66 x 76cm
CETL/ETL
1.5-2℃(°F) /hr
Part 3
PORTABLE CONTROL UNIT FUNCTION
Heater Port
Jet Port
Air Valve
Filter Housing
Filter Port
Digital Spa Control
Centre
The Portable Control Unit
(PCU)
Functions of the Spa Portable Control Unit
• LED Display:
Once powered-up, the LED display will show the current water
temperature automatically.
• Temperature Adjustment Buttons:
Raise or lower set temperature. Pressing one of
the temperature adjustment buttons will cause the LED display to flash. While it is
flashing, you can set the desired temperature. The value will increase or decrease by 1°F/
1°C with each press.
•
Temperature Adjustment Ranges:
86°F - 104°F/ 30°C - 39°C
NOTE:
Due to the size of the spa some heat may be lost as the water circulates through
the spa. This may result in a 3-4 degree variance between the temperature shown on the
PCU and the temperature of the spa water.
•
Temperature Mode Button:
Press this button to change from Celsius to Fahrenheit.
•
‘JETS’ Button:
Press the ‘JETS’ button to activate the Jet Massage System on the
spa. Pressing once will start the lowest speed of the jets (L-1 will display on the screen).
Press again to increase the speed of the jets to L-2, and press again to reach the highest
jet speed, L-3.
Hold down the ‘JETS’ button for 5 seconds to turn jets off.
When jets
turn off, ‘FIL’ will display on the screen to indicate that the filtration and heat is back on.
•
Lock Button:
Hold down for 5 seconds to lock all button functions. Repeat to remove
lock.
NOTE:
It is highly recommended that PCU buttons are locked when PCU is left
unattended.
•
‘HEAT’ Button:
Once desired temperature is set press ‘HEAT’ to begin heating.
Heat Button
Temperature Decrease
Button
Temperature Mode Button
LED Display
Temperature Increase
Button
Lock Button
PCU Controls
Digital Spa Control Centre
Jets Button
KP-10015/KP-10016 - Swift Current - JL017016NN
KP-10024/KP-10025 - Rio Grande - CA17682US
6
