www.canadiansolar.com
| 7
Use four clamps on the short side.
A2
A2
A2
A2
A2
A2
A2
A2
A2 range = (0 – 250) mm
Maximum Load:
Uplift load ≤ 2000 Pa
Downforce load < 2000 Pa
A2 range = (200 – 250) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 5400 Pa
Use four clamps on the short side and two clamps on
the long side. An additional support bar should be
placed below the center of the module.
Use four clamps on the long side. Mounting rails
run parallel to the long side frame.
A1 range = (240 – 330) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 4000 Pa
A1
A1
A1
A1
A3
A3
A5
A5
Use six clamps on the long side.
Mounting rails run perpendicularly to the long
side frame.
A3 range = (80 –280) mm,
A5 range = (80 –280) mm
Maximum Load:
Uplift load ≤ 4000 Pa
Downforce load ≤ 6000 Pa
A4
A4
A4
A4
A1
A1
Use two clamps on the long side and two clamps
on the short side.
Mounting rails run perpendicular to the long side
frame.
A1 range = (100 – 550) mm
A2 range = (200 – 250) mm
Maximum Load:
Uplift load ≤ 2400 Pa
Downforce load ≤ 2400 Pa
A2
A2