Barneveld, Netherlands
Phone: + 31 6 51920965
E-mail: [email protected]
Website: www.comfychair.nl
Enjoy the outdoors!
ASSEMBLY INSTRUCTIONS
Step 5 | Armrest carrier
• Place armrest carrier G on top of chair legs E and
D, with the four countersunk holes facing up. Make
sure the that the innermost edge is parallel to the
innermost edge at the top of the legs. Align the
front edge of G with the front edge of front leg E.
•
Secure G to E and D with four 4x40 mm screws
from the top.
• Repeat these steps on the other side of the chair.
Stap 4 | Front seating legs
• Place a front leg E against the front of side piece A.
•
Insert two bolts + washers through the large pre-
drilled holes in D and A.
•
Fasten them on the inside with two nuts + washers.
• Repeat these steps on the other side of the chair.
• Important:
balance the chair. Move it forwards and
backwards until it is standing steady and the top
and bottom of the front and back legs are flush.
Step 3 | Rear seat legs
• Place one back leg D with the large screw holes
against the back of side piece A. The small screw
holes should be at the bottom of the leg, with the
countersunk side facing out.
•
Insert two bolts + washers through the large pre-
drilled holes in D and A. Fasten them on the inside
with two nuts + washers.
• Repeat these steps on the other side of the chair.
• Place slat F between the back legs and fasten with
two 4x40 mm screws on each side in the smaller
screw holes.
D
2x
2x
2x
2x
4x
D
E
G
D
E
G
D
E
Flat
Flat
Wrong
Right
Wood
Dining Chair
CDC 800
