Barneveld, Netherlands
Phone: + 31 6 51920965
E-mail: [email protected]
Website: www.comfychair.nl
Enjoy the outdoor life!
ASSEMBLY INSTRUCTIONS
Step 1 | Side pieces
• Place side pieces A on a
flat surface with the curved
sides up.
• Insert slat B into the last notches on the back of
sidepieces A, with the curved side facing back and
the countersunk holes facing up. Ensure that the
outer edges of B are aligned with the outer edges
of A.
•
Secure B with a 4x40 mm screw on each side.
•
Take one of the C slats and place it in the first
notches at the front of the sidepieces. Secure the
slat with a 4x40 mm screw on each side.
• Place one C slat in the third notch down and attach
Step 2 | Seat slats
• Place the remaining slats C in the remaining
notches on top of sidepieces A. The outermost
edges of the slats should be aligned with the
outermost edges of the notches. The countersunk
holes need to be facing up.
•
Place the slat with the logo in the second cutout
from below.
•
Attach the slats with 4x40 mm screws.
2x
2x
Before you start
•
Carefully unpack the package and check if all
components are present.
•
Required for assembly: cordless drill, hammer
and an wrench 13. The bit for the drill machine is
included in the bag of screws.
•
We recommend that all fixing points will be
glued
with the provided wood construction glue. One
tube of glue is sufficient for three chairs.
•
Due to the drying of the glue you can only coat the
chair with oil after assembling it.
14x
1x
4x
1x
A
A
B
C
A
C
Wood
Dining Chair
CDC 800
