CAN AIRXCEL FC Series, Use And Maintenance Instruction Manual

Page: 143 / 404

141
ENGLISHENGLISH
Installation, use and maintenance instruction manual
▪
Ed. 10/2021 Rev. 03
use of burners
OFF
MAX
MIN
LIGHTING THE BURNERS
ATTENTION!
Before use, make sure that the burner spreaders, caps and pan holders are positioned properly.
burner spreader positioning
The matching burner is indicated on each knob.
The burner can be lit:
▪
manually
using the external igniter (on S versions),
▪
electronically
with 12 V/DC generator (on E versions),
▪
piezoelectrically
with mechanically/manually operated piezoelectric igniter (on P versions).
Proceed as follows to light the burner :
step action
1 press the knob corresponding to the burner you want to light
and turn it anticlockwise (to the maximum symbol).
2 At the same time, activate the flame ignition device by:
- putting an external igniter near the flame spreader (version
S)
- pressing the piezoelectric button repeatedly (version P)
- pressing the electronic ignition button continuously
(version E)
The models FC1380-81 are equipped with under-knob
electronic ignition: the spark is ignited by simply pressing the
knob
3 When lit, keep the knob pressed all the way for another 5
seconds (at maximum) and then release it, adjusting the
desired intensity of the flame.
Please note:
this delay in releasing the knob heats up the
safety thermocouple.
If the burner does not remain lit when you release the knob, it means that the thermocouple did not heat
up sufficiently. To solve this problem, repeat the operations described in the table, holding the knob down
longer after the burner is lit.
ATTENTION!
The burner must be lit without any pan or any other object on the hob unit above the burners.
PROHIBITION!
Never close the glass lid of the hob when the device is in use or still hot
ADJUSTING THE FLAME
Check that the flame is regular and stable.
To adjust the flame, turn the knob to the desired position (MIN or MAX).
The knob can also be set in the middle, between the maximum and minimum position. Do not place the
knob between the maximum and “off” position.
ATTENTION!
If the flame is irregular, check that the
burner spreader and caps are positioned
properly. ATTENTION!
The flame must not extend beyond the
bottom of the pan. Use only vessels with
a flat bottom.
adjusting the flame
COOKING OR WARMING UP FOOD
ATTENTION!
Do not forget the burners on without vessels or with empty vessels on them.
Place the pan in the middle of the lit burner, so that it is stable on the pan support.
Use only pans, trays and accessories expressly designed for this purpose, made in material resistant to
high temperatures and suitable for contact with food.
flame adjustment range
90°
160°
MA
X
MIN
OFF
flame adjustment range
90°
160°
MA
X
MIN
OFF