Version v0.1
www.canchecked.de
6)
Lay the cables
The connection cable is now pulled from the direction of the OBD connector
above to the display. A stronger wire (like welding wire) may help, which you
push down from the direction of the ventilation grille, attach the cable to the
wire and then pull it carefully up.
Push the connection cable and the USB cable through the previously created
hole.
If the connection cable has not yet been pinned into the connector, please do so
now. Make sure that the position is correct and that the pin clicks into place
easily. Then connect the connector to the display.
Be careful with the USB cable. The USB socket is very small and the cable must
be inserted very carefully. Damage to the USB socket must be avoided at all
costs and is not covered by the guarantee.
When pinning in the cables, make sure that the position is correct. The
assignment for the OBD cable is included with the cable itself.
