Version v0.1
www.canchecked.de
General information
The display unit is a very sensitive device. One should act with extreme caution and
avoid any pressure on the housing or the display itself.
CANchecked assumes no liability for this conversion or for damage during the
conversion or operation. The instructions were created to the best of our knowledge
and belief.
The conversion time is approx. 1.5 hours for an experienced car enthusiast.
Needed tools
- Assembly tool (orange in the picture – separately available)
- 10mm drill
- Pull-through aid (wire)
- 10mm screwing tool or ratchet with 10mm socket
- Torx20 nut for ratchet
- Small flat screwdriver or needle to pin out
