FINAL INSPECTION
Use the UP/DOWN button to again to move to the
desired item in that column.
NOTE:
When an item is selected, the item is set
as the current value. You may then navigate to any
other screen and the item selected item will be
kept.
Setting the Time
To set the hours:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-202_a
Select HOURS in secondary category.
Adjust the unit value using the UP and DOWN ar-
row.
To set the minutes:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-201_a
Select MINUTES in secondary category.
Adjust the unit value using the UP and DOWN ar-
row.
Selecting the Hour Mode
To select the 12/24 hour mode:
Select CLOCK in main category of Preferences
Screen.
rmo2011-001-203_a
Select 12/24 HOUR in secondary category.
Select the appropriate value in main unit or set-
ting.
Language Setting
In the preferences screen, choose:
– Languages
– Select the appropriate language from the avail-
able selections.
ASSEMBLY INSPECTION
Inspect the following parts to make sure that the
vehicle is properly assembled.
NOTE:
Ensure that all protective materials are re-
moved from vehicle.
– Front compartment cover and seat locks
– Passenger grab handles
– Front wheel lug nut torque (must be 105 N•m
(77 lbf•ft))
– Suspension arm ball joint cotter pins
– Tie rod end nuts and cotter pins
– Rear axle nut and cotter pin
– Gearshift pedal operation
– Parking brake pedal and cable operation
– Brake lines
– Foot pegs.
NOTE:
Refer to the Predelivery Check List to con-
firm that all items are covered by your inspection.
FINAL INSPECTION
Vehicle Test Run
Ride the vehicle to ensure proper operation of all
systems and components.
PREDELIVERY
2014-3
39 / 41
