PARTS TO BE INSTALLED
rbl2013-003-017_a
1. Nuts
NOTE:
You can move windshield along the tracks
to facilitate installation of nuts.
rmo2013-003-013_a
3. Torque windshield retaining nuts.
PART
SPECIFIED TORQUE
Windshield retaining nut
2.5 N•m ± .5 N•m
(22 lbf•
in
± 4 lbf•
in
)
Rear Fender
NOTE:
Before applying any torque, install all nuts
and screws.
ST LTD Models Only
Remove rear saddlebag kit.
All Models
1. Remove rear fender packaging.
2. Loosen LH and RH fender support screws.
rbl2013-002-012_a
LEFT SIDE FENDER SUPPORT
1. Screws, washers and nuts
3. Pre-assemble rear fender to its LH and RH rear
fender brackets with M6 x 12 screws, flat plas-
tic washers and M6 nuts (on back side).
rbl2013-002-013_a
1. Rear fender
2. Support
3. M6 x 12 Screws, washers and nuts
NOTE:
Do not torque screws.
4. Connect license plate light connector.
5. Secure license plate light harness inside RH
rear fender support using 4 locking ties (from
PDI kit) into factory installed retainers.
PREDELIVERY
2014-3
23 / 41
