PARTS TO BE INSTALLED
rbl2013-002-010_a
1. License plate light harness
2. Rear fender support
3. Locking ties in retainers
rbl2013-002-011_a
1. Locking tie
rbl2013-002-022_a
1. Locking tie
NOTE:
For
Australian models
route the back-up
light harness making a loop in the locking ties as
shown.
rbl2013-003-021_a
1. Locking ties
2. Locking ties in a loop
6. Put fender in position and install two M6 x 20
screws on each side.
NOTE:
Do not torque screws.
rbl2013-002-014_a
TYPICAL
1. Fender
2. Screws
7. Install two screws and nuts on each side of
fender reinforcement plate.
NOTE:
Do not torque screws and nuts.
24 / 41
2014-3
PREDELIVERY
