PARTS TO BE INSTALLED
rbl2013-003-027_b
1. 12V connector
2. Negative and positive cables connector
3. Rubber boot
All Models
15. Before installing storage compartment, re-
move the fuse box service covers as follows:
15.1 Push down on the fuse service covers to
open and pull the covers off.
rmo2013-003-011_a
1. Left fuse box service cover
2. Right fuse box service cover
NOTE:
Removal of fuse box service covers
is required only to aid in the alignment of the
front cargo module when installing it onto
the front frame of the vehicle.
15.2 Turn up and store all the wiring and con-
nectors on front cargo module to prevent
them from being pinched between the
cargo module and front frame.
All Models
16. Assisted by another person, position front
cargo module onto upper supports in the
front frame of the vehicle.
NOTE:
Ensure that no cable or wiring was pinched
between cargo module and front frame prior to
installing any fastener.
rbl2014-004-045_a
TYPICAL
1. Front cargo module
2. LH upper support, RH similar
17. Secure the front cargo module using following
hardware.
– At the TOP, use four M6 x 20 hexagonal
flanged forming screws.
– At the bottom, use two M6 x 12 hexagonal
flanged screws.
NOTE:
In following illustration, some panels were
removed for clarity
rbl2013-003-023_a
TOP SCREWS
1. M6 X 20 hexagonal flanged forming screw locations
PREDELIVERY
2014-3
15 / 41
