Can-Am SPYDER RT Series 2020, Original Instructions Manual

Page: 29 / 203

SECONDARY CONTROLS
25
rmo2010-001-031_h
1. Slide button to OFF
Note: The CRUISE ON status will dis-
appear in the digital display.
6) Engine Stop Switch
The engine stop switch is located in
the top portion of the right handlebar
housing.
219002072-006
The switch has two positions and must
be set to the run position before you can
start the engine. It allows you to stop
the engine anytime without removing
your hand from the handlebar.
7) Hazard Warning Button
The hazard warning button is located
on the top of the right handlebar hous-
ing.
219002072-007
Push the button to turn on or off the
hazard warning lights.
8) Reverse Button
The reverse button is located on top of
the left handlebar housing.
219002072-008
Push and hold the reverse button to
allow shifting into reverse. Refer to
OPERATING IN REVERSE
in
BASIC PROCE-
DURES
for detailed instructions.
The backup lights turn on when the
vehicle is in reverse.
9) BRP Connect Button
The BRP Connect button is located on
the back of the left handlebar housing.