manualshive.com logo in svg

Can-Am Renegade, Operator'S Manual

Share
Download
Can-Am Renegade Operator'S Manual Download Page 128

The repair or replacement of parts or the performance of service under this war-
ranty does not extend the life of this warranty beyond its original expiration date.

5) CONDITIONS TO HAVE WARRANTY COVERAGE

This warranty coverage is available

only

if

each

of the following conditions has

been fulfilled:
• The 2007 Can-Am ATV must be purchased as new and unused by its first

owner from a BRP dealer authorized to distribute Can-Am ATVs in the country
in which the sale occurred (“BRP dealer”);

• The BRP specified pre-delivery inspection process must be completed and

documented;

• The 2007 Can-Am ATV must have undergone proper registration by an autho-

rized BRP dealer;

• The 2007 Can-Am ATV must be purchased in the country in which the pur-

chaser resides;

• Routine maintenance outlined in the Operator’s Guide must be timely per-

formed in order to maintain warranty coverage. BRP reserves the right to
make warranty coverage contingent upon proof of proper maintenance.

BRP will not honour this limited warranty to any private use owner or commercial
use owner if the preceding conditions have not been met. Such limitations are
necessary in order to allow BRP to preserve both the safety of its products, and
also that of its consumers and the general public.

6) WHAT TO DO TO OBTAIN WARRANTY COVERAGE

The customer must notify a servicing BRP dealer within two (2) days of the ap-
pearance of a defect, and provide it with reasonable access to the product and
reasonable opportunity to repair it. The customer must also present to the autho-
rized BRP dealer, proof of purchase of the product and must sign the repair/work
order prior to starting the repair in order to validate the warranty repair. All parts
replaced under this limited warranty become the property of BRP.

7) WHAT BRP WILL DO

BRP’s obligations under this warranty are limited to, at its sole discretion, repair-
ing parts found defective under normal use, maintenance and service, or replac-
ing such parts with new genuine Can-Am ATV parts without charge for parts and
labor, at any authorized BRP dealer during the warranty coverage period.

BRP reserves the right to improve or modify products from time to time without
assuming any obligation to modify products previously manufactured.

126

_____________________

Summary of Contents for Renegade

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands