manualshive.com logo in svg

Can-Am 2008 DS 450, Operator'S Manual

The Can-Am 2008 DS 450 Operator's Manual is a comprehensive guide for all owners of this powerful ATV. Available for free download from our website, this manual provides detailed instructions, maintenance procedures, and invaluable tips, ensuring the optimal performance of your Can-Am 2008 DS 450.

Share
Download
background image

Carrying Loads

Any load carried on the vehicle will affect the stability and control of the vehi-
cle. For this reason, do not exceed the load limits of the vehicle's manufacturer.
Always make sure the load is secured and cannot interfere with your proper con-
trol. Always be aware that the “load” may slide or fall off and create an accident.
Avoid loads that may protrude sideways and get snagged or caught in brush or
other obstacles. Avoid covering and obstructing the headlamp or taillight with
the cargo.

This vehicle is designed specifically to carry an operator only. Even with a long
seat that provide unrestricted operator movements, it is not designed nor intend-
ed to carry passenger(s). Carrying passenger(s) may affect the stability and your
control of the vehicle.

Recreational Riding

Respect the rights and limitations of others. Stay away from areas designated
for other types of off road use. This includes snowmobile trails, equestrian trails,
cross country ski trails, mountain bike trails etc. Never assume there are no other
users on the trail. Always stay to the complete right of the trail and do not zig
zag to one side of the trail then the other. Be prepared to stop or pull off to the
side if another trail user appears in front of you.

Join a local ATV club. They will provide you with a map and advice or inform you
where you can ride. If a club does not exist in your area, help start one. Group
riding and club activities provide a pleasurable, social experience.

Always keep a safe distance from other riders. Your judgment of speed, ter-
rain conditions, weather, mechanical condition of your vehicle and the “trust in
judgment” you have in others around you will help you make a better choice of
appropriate safe distance. This vehicle, like any other motorized vehicle, cannot
stop “on a dime”.

Before you ride, tell someone where you are planning to travel and your expected
time of return. Never consume alcohol or drugs before or while riding!

Depending on the length of your ride, carry additional tools or emergency equip-
ment. Find out where you can get additional gasoline and oil. Be prepared for
the possible conditions you may encounter. An emergency first aid kit should
always be a consideration.

Environment

One of the benefits of this vehicle is that it can take you off the beaten path
away from most communities. However, you should always respect nature and
the rights of others to enjoy it. Do not ride in environmentally sensitive areas.
Do not drive over forest crops or shrubs... nor cut down trees or take down
fencing... nor spin your wheels and destroy the terrain. “Tread Lightly”.

Chasing wildlife is in many areas illegal. Wildlife can die of exhaustion after being
chased by a motorized vehicle. If you encounter animals on the trail, stop and
observe quietly and with caution. It will be one of the better memories of your
life.

42

___________

SAFETY INFORMATION

___________

Summary of Contents for 2008 DS 450





















































































































































Reviews:

No comments

Related manuals for 2008 DS 450

Panasonic KX-TGA571 Installation Manuals preview
KX-TGA571
Brand: Panasonic Pages: 8
J&M 55 Series Operator'S Manual preview
55 Series
Brand: J&M Pages: 25
Hisun HS 200UTV-2 Owner'S Manual preview
HS 200UTV-2
Brand: Hisun Pages: 57
Polaris 2879790 Instructions preview
2879790
Brand: Polaris Pages: 3
XY Powersports XY500UTV Service Manual preview
XY500UTV
Brand: XY Powersports Pages: 259
Access Motor DRR 100 User Manual preview
DRR 100
Brand: Access Motor Pages: 22
Flagro FVO-1100TR Operating Instructions Manual preview
FVO-1100TR
Brand: Flagro Pages: 29
Suzuki LT-Z400 Service Manual preview
LT-Z400
Brand: Suzuki Pages: 492
Bluewheel HK400 User Manual preview
HK400
Brand: Bluewheel Pages: 50
Erde CH451 Assembly Instructions preview
CH451
Brand: Erde Pages: 4
X-TREME XA-1000 Product Handbook preview
XA-1000
Brand: X-TREME Pages: 11
Polaris Sportsman 9920775 Owner'S Manual preview
Sportsman 9920775
Brand: Polaris Pages: 144
Polaris Sportsman 800 EFI 4x4 2012 Service Manual preview
Sportsman 800 EFI 4x4 2012
Brand: Polaris Pages: 485
Polaris Magnum 9917518 Owner'S Manual Supplement preview
Magnum 9917518
Brand: Polaris Pages: 1
Hammerhead eXtreme Sport ES150IIR Owner'S Manual preview
eXtreme Sport ES150IIR
Brand: Hammerhead Pages: 67
KAYO MOTO AT125-2 Assembly Manual preview
AT125-2
Brand: KAYO MOTO Pages: 8
KAYO MOTOR AY70-2 Service Manual preview
AY70-2
Brand: KAYO MOTOR Pages: 80
Taylor-Dunn B0-011-00 Operation, T Roubleshooting And Replacement Parts Manual preview
B0-011-00
Brand: Taylor-Dunn Pages: 180

Brands by name

Popular brands

Load more brands