NETWORK
Interface Ethernet 10/100 Base-T
Connector RJ-45
Protocols TCP/IP, UDP, Multicast, DHCP, PPPoE, SMTP, HTTP, SNMP
VIDEO
Output 1 Composite (1 Vpp 75 Ohm, BNC)
Compression H.264
Resolutions NTSC : 720x480, 720x240, 352x480, 352x240
PAL : 720x576, 720x288, 352x576, 352x288
Frame rate NTSC : Max 30fps, PAL : Max 25fps
Frame Rate Range NTSC : 0.2~30fps, PAL : 0.2~25fps
Bandwidth Configurable between 32 kbps and 4 Mbps
AUDIO
Input 1 Line-in (Mini-stereo)
Output 1 Line-in (Mini-stereo)
Standards G.711
Data rate 32Kbps ~ 128Kbps
CONNECTORS
RS-485 1 port
Sensor 1 port
Relay 1 port
MANAGEMENT S/W
Web viewer and 16ch viewer free, 36 ch viewer optional
OPTIONS PoE
H.264 IP Camera Cywatch
H.264 IP Camera Cywatch
34
35
■
Troubleshooting
If there are problems with the camera operation, check the tables below. If
the problem persists, please contact the agent who supplied the product.
Problems
Nothing appears on the
screen.
The video image is not
clear.
There is a problem with
the camera operation.
The camera surface is
too hot and black stripes
appear on the screen.
ㆍ
Check the power connection.
ㆍ
Check the LAN Cable.
ㆍ
Make sure that the lens is clean.
Clean the lens with a clean lint free cloth or
brush.
ㆍ
Make sure that the screen is not exposed
directly to a bright light.
Re-position the camera if necessary.
ㆍ
Check if an appropriate power source to
the camera complies with the manufacturer's
standard requirement, or if the voltage is
fluctuating. Check for ground loops.
Troubleshooting
The MOTION
DETECTION function is
not working.
Colors are not quite
The image on the
screen is black
ㆍ
Check the video format of the your camera
(NTSC / PAL)
right.
COLOR mode is not
working.
ㆍ
Check that motion detection of setup on the
web view is 'OFF'
ㆍ
Check the 'WHITE BAL' setting.
ㆍ
Check if the AGC menu is set to the OFF
position.
SENS-UP function is not
working.
ㆍ
Check if the AGC menu is set to the OFF
position.
ㆍ
Check if the SHUTTER menu is set to
MANUAL mode.
Specification
■
