Camtech CMDC270S, Instruction Manual

Page: 21 / 25

SPECCIFICATIONS
MODEL NTSC PAL
Power source DC 12V ± 10%
Power
Power consumption 2.0 Watts ( 160mA )
Image sensor 1/3 ″ SONY EXview HAD CCD II
Total pixels 1020(H) x 508(V) 1020(H) x 596(V)
Effective pixels 976(H)x494(V) 976(H)x582(V)
Scanning system 2:1 Interlace
Scanning frequency
15.734KHz(H)
x 59.94Hz(V)
15.625KHz(H) x 50Hz(V)
Sync. system Internal
Electronic Shutter 1/60 ~ 1/10,000 sec 1/50 ~ 1/10,000 sec
Resolution 650TVL
Min. illumination
Color 0.32Lux @ f1.6 (0.18Lux @f1.2)
Video output 1.0Vp-p (75 ohm, composite)
S/N ratio 50 dB (AGC OFF)
Lens
2.6-6mm(F1.6-2.4) / 4-9mm(F1.6-2.4) / 3.6mm fixed(F3.0)
Camera Control Internal OSD Key
ATR (Adaptive Tone
Reproduction)
LUMINANCE(L/M/H), CONTRAST(L/LM/M/MH/H)
Backlight OFF / BLC / HLC
Day & Night Color / BW / Auto (Digital D/N)
MD (Motion Detection) "On (4 areas) / Off Adjustable Size & Sensitivity"
PM (Privacy Masking) 0 ~ 4 zone
WB (White Balance) ATW / PUSH / USER1 / USER2
/ ANYICR / MANUAL / PUSH LOCK
AGC (Auto Gain
Control)
On / Off
Exposure Auto Iris / Auto Iris + Electronic Shutter
Brightness 0 ~ 255 steps
Contrast 0 ~ 255 steps
Sharpness 0 ~ 255 steps
HUE 0 ~ 255 steps
Gain 0 ~ 255 steps
NR(Noise Reduction) OFF / Y / C / Y, C
General
F
U
N
C
T
I
O
N
Mirror ON / OFF
Power input DC Jack
Video output BNC connector
Operating temperature -10ºC ~ +50 ºC
Operating humidity 0~96% (non-condensing)
External dimension 120 x 88 mm
Connector
& etc
Weight 240g
15